Leader 120 FPV Racer: Meet The 120mm FPV Racing Drone

Meet The Leader - 120 120mm FPV Racing Drone

Meet The Leader – 120 120mm FPV Racing Drone

The Leader is one of the most well-known multirole manufacturers and the FPV Racing Drone – PNP is one of its best drones. Find out if this is the right drone for you in our review.

Leader – 120 is a relatively recent mini quadcopter from Leader. It builds on earlier versions and fixes some of the criticism it has received in the past. It offers a live video feed for the 4.3-inch color screen built into the control. This is why it is called FPV; first-person view.

No remote controller is the most interesting equipment that comes in the package. The remote control has a very stylish design. It also has a MicroSD card slot if you want to record videos.

The ergonomics of the control are very good. The control is comfortable enough to hold you for a long period of time.

It flies very well. It is easy to fly; the body of the aircraft produces sufficient “drag” for the drone to move a little slow and also does not accelerate very quickly making flight behavior easy and predictable. So, it’s a great drone to learn and gain basic flight experience.

It is worth mentioning that the Leader – 120 is very small and lightweight to handle the outdoor flight in windy conditions. It is easily pushed by moderate winds. (This applies to most small multi-rotors, of course).

Main Features:-

● Furious and stable – 30C LiPo, 1104 7500KV motor, 70mm three-blade propeller
● Durable 3K carbon fiber material, 3mm thick chassis + 2mm thick lateral boards
● Minicube F3 6DOF FC with OSD compatible with CleanFlight and BetaFlight firmware
● Remote PID adjustment and configuration of OSD via BetaFlight ground station
● 600TVL AIO camera with adjustable angle, 5.8G 48CH 25mW VTX and whip antenna

Specifications:-

  • Wheelbase: 120mm
  • Size: 115 x 90 x 30mm
  • Weight: 70g ( not including battery )
  • Frame material: 3K carbon fiber
  • Bottom plate thickness: 3mm
  • Lateral plate thickness: 2mm
  • Brushless motor: 1104 7500KV
  • Brushless ESC: 4-in-1 BLHeli – S 20A
  • Propeller: 70mm three-blade
  • Camera: 600TVL CMOS
  • Video transmitter: 5.8G 48CH 25mW NSTC
  • Flight controller: Minicube F3 6DOF with OSD
  • Buzzer size: 13 x 13mm ( with integrated LED )
  • Battery: 7.4V 500mAh 30C LiPo ( included )
  • Flight time: 3 – 6 minutes

Minicube F3 6DOF Flight Controller

  • Size: 27 x 27 x 5mm
  • Mounting hole spacing: 20mm
  • Processor: STM32F303 MCU
  • IMU: MPU6000 SPI
  • OSD display: battery voltage, RSSI, flight mode, flight duration, aircraft name etc.
  • Firmware: OMNIBUSF3 BetaFlight 3.1

Minicube 4-in-1 BLHeli – S 20A ESC

  • Size: 27 x 27 x 5mm
  • Mounting hole spacing: 20mm
  • Firmware: BLHeli – S 16.5
  • Processor: BB2 48MHz chip
  • Power supply: 2 – 3S LiPo
  • Continuous current: 4 x 20A
  • Burst current: 4 x 25A ( up to 10 seconds )
  • BEC output: 5V 1A
  • Programmable: yes
  • BetaFlight passthrough ready
  • DShot600 ( default ) ready

So, what are you waiting for? Go now and grab one for you at a special discount.

Add Comment