How to Fix USB Device Not Recognized Error In Windows: USB Device not recognized error in Windows is one of the most common errors which often drives Windows users to frustration. Surely more than one occasion has happened that Windows does not recognize your USB device when connecting to the PC. Fortunately, there are several methods to solve this problem without formatting your device.
Firstly, what you must determine is the source of the failure since it is possible that the USB connector of your computer is giving the failure.
Therefore, disconnect the device and try to connect it to another different USB port and if possible plug it on the back of your computer. These connectors are less prone to failures as they are soldered to the computer’s motherboard and minimize connection problems that could affect the USB ports on the front of your computer.
You can also discard these problems by connecting the device to another computer. If it recognizes it without problems in another computer or changing the USB port, the fault would be in the USB ports of your computer and not in the device.
Table of Contents
How to Fix USB Device Not Recognized Error In Windows
Here are some of the methods that can help you to fix the error:
Unplug and Plug Your Computer Power Cable
This is the easiest way to manually fix the “USB device Not Recognizing” error in your Windows computer. Just unplug your PC’s power supply from the back of the CPU and then plug it in. This will hard reset your computer and make Windows software recognize the connected hardware.
Clean The RAM
Dirty RAM is another reason for “USB Device Not Recognized” error. If possible, open your CPU and then remove the RAM. Wipe it clean with a satin cloth. This will remove all the dirt as well as carbon which might be restricting the RAM from functioning optimally.
Updating The USB Drivers
1) For this press Windows key + R and on the run box type “devmgmt.msc”
2) This will open up the device manager. Here you need to locate the entry for Universal Serial Bus Controller. Make sure your USB device is plugged in, then look for any entry showing Unknown Device
3) Now right click on the Unknown device and there you will find the option “Update Drive”. Make sure you are connected to the internet and then click on “Update driver”
This will update the required driver and will fix the problem.
Uninstall USB Devices
Device drivers are primarily responsible for the component functioning properly. If you suspect that this may be the source of your computer’s problems with recognizing USB devices, you should proceed to reinstall the affected driver
Connect the device that gives you problems and press the Windows key + R and on the run box type “devmgmt.msc”
The Device Manager box shows all the devices you have connected to your computer. If your device is causing problems, next to it will appear a yellow triangle with an exclamation mark.
Right-click on it and choose the Uninstall option. After the uninstallation is completed, restart the computer by keeping the device connected. When it restarts, it will detect it again and install the driver that was corrupt or badly installed.
Use USB Fix It
Download and install USB Fix it on your Windows computer and then launch the software. Now select the option “Detect Problems and apply the fixes for me”
Now the software will scan your computer for existing USB problems, if it finds any existing problem then it will fix it for you or will allow you to download the fix from the internet.
This is how you can solve USB Device Not Recognized Error in Windows computer. Hope you like the tutorial, share it with others also.